Say Goodbye To Limescale On Shower Doors
We go all out for a neat and clean bathroom, but when doing that, keeping your glass door spotless is a big challenge. Moreover, it is particularly difficult to achieve that neatness if you live in a hard water area.
In such instances, limescale or calcium carbonate deposits, white or green, may show up on your shower glass, tiles, or other fixtures. Hard water is high in calcium and magnesium content. The continuous deposition of which builds up over time, forming a hard, chalky, coarse structure called limescale.
Preventing limescale and removing it is a challenging situation. You might need to use many products to eliminate limescale on glass doors, but with the right technique it becomes easy.
Instead of buying a trolly full of chemicals, we have brought you ideas on how to get rid of limescale in a sustainable way.
Limescale is rough and coarse, but you can easily remove it using a spray bottle, water, gloves, cotton cloth, microfibre cloth, and a squeegee.
How to remove limescale from shower door
After you have collected the stuff for removing limescale, let’s hop on to the removal process.
Use a bathroom limescale remover on the affected surface, leave it there for about 5 minutes, and then clean it with microfibre cloth. The microfibre cloth is more beneficial and sustainable, using approximately 95% less water and other chemicals than cotton cloth or mop.
The tiny particles of microfibre cloth tend to remove or pick up more dirt and food particles than its counterpart.
Do not forget to wear rubber gloves to prevent yourself from coming in direct contact with the limescale and other chemicals.
How to prevent limescale
Once your glass door looks sparkly clean again, you must take measures to prevent limescale buildup.
1. Water softener
You can reduce the content of calcium and magnesium in water by installing a water softener.
This device will eliminate the minerals responsible for limescale buildup and slow down the buildup procedure.
2. Use Harpic spray
You can reduce calcium and magnesium content by filling a spray bottle with Harpic limescale remover and spritzing it on the surface of your glass door. Remove it with a squeegee or microfibre cloth after spraying the surface.
3. Regular maintenance
After every shower, you must wipe your doors and tiles with a squeegee or a microfibre cloth.
Regular cleaning requires little effort and will continue to benefit you in the long run.
4. Proper Ventilation
A well-ventilated bathroom eradicates moisture that could lead to the buildup of limescale, mold, or the development of an environment that provides a breeding ground for bacteria and germs.
Keep the window open after using the shower for at least 15 minutes to maintain ventilation. If you do not have a window in your bathroom, you can install an air vent or an exhaust fan for ventilation.
FAQs
1.How do you remove stubborn limescale from a shower glass?
Use Harpic spray to remove that stubborn limescale, or if not available, the next best thing would be to use boiled vinegar as vinegar spray to act as shower glass limescale remover.
2. How do you remove hard calcium from shower glass?
You can Install a water softener to eliminate calcium and magnesium deposits from your hard water. However, the quickest and most effective solution is to use a Harpic limescale remover to get the job done.
3. What do professional cleaners use to remove limescale?
Professional cleaners use Harpic spray to remove limescale. You can seek the help of a professional if the limescale removal techniques do not work but with the right amount of time and product used, you can get it done easily.